Tuesday, Carpentry Day

I do believe that Tuesday has become carpentry day.

I made a flying trip to Mitre 10 this afternoon when Red woke up from her sleep. I bought a pack of 38mm screws, a large spring (the type you put on a gate to make it self-closing) and a twin pack of hooks and eyes. We made it home just in time to walk around and collect the big kids from school.

When all 3 of them were happily playing, I took myself out to the gate (yes, again), and attached the spring brackets and spring, then tightened the spring so it will close the gate once it is opened. It took a little trial and error but I think I got it just perfect. Then I attached the eye to the gate and the hook to the fence post. This is for when we actually need the gate to stay open for any period of time - say for bringing something large in or out.

Self-closing spring and hook and eye on the gate.

Carpentry Class #6


The mood in the class tonight just seemed a bit off for some reason.

I ended up crawling around on the floor screwing my seat together, which wasn't terribly comfortable, as this morning, walking home from music and movement group with Red on my back in the Manduca, I rolled my ankle and skinned my knee. My ankle was fine about 3 minutes later, but my knee has been stinging the rest of the day.

It actually started to look like something tonight!

A rather large annoyance tonight, was that there were about 4 drills in the room, but only one had a partial charge that was useful enough, the rest were so un-charged that they were next to useless. I did see that there was a spare battery for one drill in the charger, but the charger wasn't plugged in! I would have thought that they would have charged them over night so that the school Wood Technology students could use the the following day. Being me, I plugged it in, and when the partially charged drill (which was being shared by 3 people!) pretty much ran out, I figured I had nothing to lose by at least trying the charging battery, which at this stage had been charging for about 15 minutes at the most. Imagine my surprise when it actually seemed to have a bit of oomph behind it! So I managed to get the seat looking like a seat tonight!

7 pieces of wood, 30 screws and some glue. Now looking a lot like it is supposed to!

I actually left a bit early tonight. Really, I couldn't do much else. I did think about taking my own drill this week, but it didn't happen. Next week I will make sure I do. And I will make sure it has a full charge in it too!


I am thinking now that I won't put the fancy looking feet on it - they just don't look sturdy enough and I don't have enough ply (in one length) to make fancy bits for the front and back. I think it will be better for the girls at the height it is now too - it will eventually have a squab cushion on the top of it too, which will give it more height.


More Planning


This afternoon I had the kids help me do some measuring.

I am in the very early planning stages of a play fort for the back yard. I established that it needs to be 1.5m from the back fence and probably 2m or 2.5m from the hedge along the side boundary. I think it will be between 1.5-2m square. It will be raised, underneath there will be a 'storage cage' for all the outside toys - bikes, ride-ons, naughty children (haha!) etc) Up on the platform, I want to build a really cool, functional play house, with a deck. There will be a slide to come down on. I also plan to put a large beam out from the side, with an a-frame at the other end, and I plan to attach 3 swings made from old tyres, suspended by chains.

I'm really excited about it! But I think it will probably cost an absolute bomb!! The kind of wood I will need isn't cheap! But the kids will have such a lot of fun in it!


Tools

I managed to win a Trade Me auction for a jig saw last week - $30! It arrived on Friday, but I didn't get to open it straight away as we had a very busy Friday and weekend. When I did open it, I was amused that a spider came crawling out! DIY-impaired husband, who is also scared of spiders, was not so impressed. I may have to employ spiders to guard all my power tools from him in the future!

Carpentry Class #5

Last night went FAR too quickly! I came home absolutely covered in white sawdust. It was fantastic!


So after cutting almost everything I needed last week, last night I got to use the table saw all by myself to cut the last piece (MDF for the top, as it won't be seen) That was great fun!

I spent most of the rest of the night sanding. First I was using the belt sander, then I finished off with hand sanding - I actually preferred the feel of the finish it gave after I had hand sanded.

I made a bit of a mess...

I got FILTHY!

I drilled holes ready for screwing the seat together next week. *Note to self, remember to sort out screws for next week!*

Two boards clamped together, marked and holes drilled ready for assembly next week.

Second Carpentry Class

I have realised that I didn't blog about my second week of carpentry class - when I finished my cooling rack/trivet.

I can't remember exactly, given it was 3 weeks ago, but I remember I drilled holes then spaced out the slats and then nailed it all together. When I brought it home, I oiled it, and I have been using it at dinner times when I have a hot dish out of the oven to put on the table

My first project, complete!

More on the gate!

Yesterday morning I didn't manage to control myself in the swearing department when I looked out the window before I took the kids to school. My gate was lying on the footpath!

I knew that the bottom packer had split a bit when I screwed it on, but I had hoped for the best. So before I met my Mum for lunch yesterday, I hot footed it to Mitre 10 Mega and bought a 650mm piece of treated decking timber (the same stuff I used on the gate frame). When I got home, I broke out the circular saw, cut off a 1 inch strip, then attached the remaining length to the gate post. I then attached the hinges to it - one gate, hung, better be for the last time, or I'll spit!!!

Right, gate, thats the last time I hang you!

With the 1 inch length I cut off, I screwed that to the opposite gate post, on the outside, as a stop. With the child-proof magnetic latch, when it is closed now, it closes with a distinctive 'clunk' so I know that it is closed!

The stop on the outside of the gate.

I don't think it will dare come off again! It would have ME to deal with if it did! I have certainly learnt a LOT while hanging this gate!

Front gate: Done!

Finally!!! It feels as if we have been without a functioning gate for a month rather than a week at most.

Saturday

After wrestling with a rusty, dull handsaw to cut the angles for the crossbearer, giving up, finding a hacksaw, putting in a new blade, starting it with the hacksaw and struggling with the rusty, dull saw for the rest of the two cuts, I put the crossbearer in screwed it on.

'WOOHOO!' I thought 'I can hang it now!' But my moment was short-lived when I discovered that the DIY-impaired husband had re-measured the gap for me, while I was at Mitre 10 Mega on Friday, and it turned out that MY measurement I had written down was correct, his measurement was 5cm too short. I was rather cross (understatement!!). I could carry the gate through the gap without hitting it on either fence post. I could have cried... but instead I yelled, and he left an hour early for work. Oops. Sorry Mr DIY-impaired.

After I had cooled down a bit, I decided I needed to just cut down a couple of the offcuts and attach them to the fence post then attach the gate to those. However, I was not really keen on attempting that with my saw (incidentally, it was found on the ground in the shed under the lawnmower) so when my Mum came to visit, she came with me to wrangle children and we made another trip to Mitre 10 and came home with some 75mm screws, a pair of whacking great hinges (that came complete with pathetic 'why even bother' screws) aaaand...... a shiny new Mactec (the Makita 'home brand' said the man in the shop) circular saw!

That night, Mum took the big kids to her place for a sleepover, so it was just Red and I, which was just lovely! The next day it poured with rain.

Monday morning

I had to wait to play with it until this morning. I didn't even get it out of the box - very restrained!

Off-cuts, ready to be cut down further to become packers

So this morning, when DIY-impaired husband took Red to her swimming lesson, I got on with it and cut down the bits of wood, attached them to the gate post, then attached the gate to the packers!

Hinges placed, ready to be attached to the gate.

I loved using the circular saw - and upon skim-reading the instruction manual, I see that I can but beveled edges up to 45 degrees too, so that it good to know!

I had to move the magnetic gate latch and re-site it on the fence post and the gate, and now it's all good to go!

All hung and useable! 

Sadly the picket profile isn't exactly the same, but I'm pretty sure our old pickets are pretty original!

The only thing I needed to sweat about, was that when I screwed on the bottom packer, it split! So I may need to do something about that another time, but hopefully it will just stay put for a good long time *cross fingers and eyes*

Now Red can go outside with the big kids and play safely while I cook tea each night! Woohoo!

Manky old gate. I'm going to hang on to it and hopefully recycle the pickets when I get around to making the playhouse that is in the pipeline.

The Saga Continues: The Gate, The (almost) Final Chapter

For the last month or thereabouts, our front gate has been annoying me.

First I had to replace the hinges. This did not work, due to the ridiculously small size of the accessible wood and rusty metal frame, I had to buy silly piddly sized hinges. Unsurprisingly, it came off of these hinges. On the bright side, I had to buy some taps to get some dead screws out, and will now forever own taps :)

These are taps - no, not the kind that water comes out of, they are to remove damaged screws.

Next I replaced the hinges with slightly more heavy duty hinges, and used decent treated screws, made for outdoor use in pine. Then the wood totally split and the entire gate became as what we call 'totally shagged'

The gate is currently leaning precariously against the fence post. We can kind of use it, in a pinch, if it is propped up with a brick and latched to the magnetic childproof latch. Not exactly ideal with a 23 month old Red to consider!

Totally fed up, I went to Bunnings the other day (I actually went in for a sheet of plywood for my carpentry class project) and asked what they could sell me in a pre-made gate, as I didn't really think I had the time to make my own. The man at Bunnings wasn't terribly helpful. They didn't have any. He didn't offer me any other options. So I bought my ply and left.

This morning however, I decided I would go and check out what Mitre 10 Mega had to offer me in the pre-made gate department. Sadly the only one they had was 200mm too small. So he suggested I could just buy the palings and some wood and make one. So that is exactly what I did! Well, sort of.

I had him cut the two pieces of wood to size for me (while he did, I introduced Red to a forklift), he then asked if my husband would be able to sort out the crossbearer himself, I laughed and said that my husband would not be going anywhere near it until it was hung in the gap! He smiled and asked if I had a handsaw to cut it myself. I said I did. He then carried it all out to the car for me and suggested I buy 45mm screws, gave me the bit of paper to pay on. I thanked him and he was on his way! Now THAT is what I call service! Just because I am a woman carrying a small child does not mean I don't know how to weald a power tool!

The back of my car, full of wood and Girl Guide biscuits.

So, home after a morning out to entertain Red, when she was in bed, I went and retrieved the wood from my car. I laid it all out on my bedroom floor in the sun, and got to work. I had screwed both end pickets to the two pieces of framing wood and had started laying out the others to work out the space when Mr DIY-impaired left for work. Soon after I had all of the bottom end screwed on. About then Red woke up and got out of bed and came in to project manage for me.

The beginnings of my new, extra-wide gate.

She looked after my other drill (I decided that taking out the battery would make it lighter for her, and would also just make sure she didn't drill anything she oughtn't, like her own hand!) and tried to put a screw in it as a bit while I screwed the other ends of the pickets on.

Trying to put a screw in the chuck

Lighter without the battery in the drill

Red through the gate offering me some of her lunch

I flipped the new gate over and marked where I needed to cut the crossbearer and went to find my handsaw. But wait... who has moved my saw? It isn't where I left it! In fact, it is nowhere to be found! I called the DIY-impaired husband to enquire of its whereabouts. He said 'it's probably in the shed' Ha! Maybe it is, but that shed is such a shitfight, I'm not taking Red in there to help me find it. He says he will go and find it for me tomorrow before he goes to work. We'll see.

All marked and ready to cut, when Mr DIY-Impaired fetches the saw from parts unknown

I'm very pleased with my gate so far, it looks nice, it's rather heavy - I may need to get some bigger more industrial looking hinges, as I fear the others I bought last week are a bit too piddly. We shall see though.